Step-by-step guide on how to install artificial grass easily

Installing artificial grass

GUIDELINES
This guide provides a complete step-by-step process for installing artificial grass, combining professional best practices with practical tips for achieving a flawless, long-lasting finish. Whether installing as a DIY project or using a professional installer, careful preparation and patience will deliver the best results.

Step 1: remove existing grass

Remove all existing turf and vegetation.
For larger areas, a turf cutter is strongly recommended as it:

  • Saves time
  • Reduces effort
  • Helps achieve a more level surface

Clear all debris and check for soft or uneven ground.

Step 2: install the edging

Edging is essential for a neat, durable finish and to contain the grass properly. Suitable edging materials include:

  • Timber battens
  • Metal edging
  • Brick
  • Concrete
  • Patio or paving borders

Artificial grass pile height range from 16 to 50mm, so ensure your edging height suits the product. Fix all edging securely before proceeding.

Step 3: lay the base

Base depth depends on ground conditions, but under normal circumstances, the recommended structure is:

  • 50–70mm of type 1 aggregate
  • 20mm top layer of Grano dust (fine type 1: 2–6mm)

Ground make-up:

  • Grass
  • Membrane
  • Base material
  • Subsoil
  • Grano dust or sharp sand
  • Solid edging/border

The finished base should sit 10–20mm below the top of the edging to allow space for the grass pile.

Compaction and drainage:

  • Compact the base using a vibrating plate compactor
  • Create a slight camber or slope toward the edges for drainage
  • Lightly spray with water to reduce dust and improve binding

Once compacted and level, install a landscape fabric/weed membrane over the entire area and pin it firmly into position.

Before you begin: pile direction

For the most natural appearance, the grass should be installed with the pile direction facing toward the house, so you are looking into the pile when viewing from indoors.

Optimized pile direction for a natural-looking artificial lawn

Step 4: position the grass

  • Roll out the artificial grass over the entire area
  • Allow all edges to overlap the perimeter
  • Let the grass settle and acclimatise for 1–2 hours

Step 5: trim and secure the edges

Once acclimatised:

  • Trim neatly along all edges using a sharp trimming knife
  • Cut so the grass sits into the recess between edging and base
  • Glue or nail the grass into the edging where required

Step 6: brush the pile

Once fully fitted:

  • Brush the entire surface using a stiff broom
  • Always brush against the direction of the pile to lift it

Step 7: optional kiln-dried sand infill

While not essential, infill is recommended for high-use areas such as family gardens.

  • Apply approx. 5kg per m²
  • Spread evenly
  • Brush in thoroughly to settle between fibres
  • Adds stability, weight, and durability

⚠️ Pet owners: It is recommended NOT to use sand infill, as this helps prevent odours.

How to join two+ lengths of artificial grass

professional artificial grass installation for a perfect lawn

Step 1: cutting the lengths

  • Align both rolls with the pile running in the same direction
  • Fold back edges
  • Identify the 3rd and 4th stitch row
  • Cut between them through the latex backing only
  • Avoid cutting the grass fibres
  • Repeat on the second roll

✔ Always use sharp blades – replace frequently for the cleanest cuts.

Joining artificial grass

Step 2: joining the lengths

  • Position the two cut edges together and fold them back
  • Roll out joining tape (shiny side facing down)
  • Apply adhesive evenly
  • Carefully fold both edges onto the tape
  • Ensure no fibres touch the adhesive
  • Walk gently along the joint to secure it
  • Adjust slightly until the join becomes invisible

⏱ Allow at least 2 hours for the glue to set (up to 24 hours in cold conditions)

Artificial grass for a beautiful garden

Hints and tips for a perfect finish

  • Take your time, invisible joins require patience

  • Do not over-apply adhesive

  • Avoid installing during rain or on wet tape/grass

  • Keep knife blades razor sharp

  • If glue contacts the grass, use a light solvent and cloth to remove